Charge in time after using up. Do not allow electric vehicle battery to be placed for a long time without electricity, otherwise the battery plate will be sulphate. Recharge once a week. The green light, said battery can be used
Battery grid Battery grid is an important component to determine the sealing performance of the cell. Now the battery grid produced by electric bicycle manufacturer mainly adopts lead-calcium-tin alloy. This alloy is one of the core technologies of sealed batteries.
Batteries need to be recharged before they are exhausted. Battery decay is accelerated when the battery is exhausted, so the correct routine is to keep the battery fully powered for a long period of time and fat tire electric bike
At present, the batteries used on electric bicycle include sealed lead acid battery, lithium ion battery, nickel hydrogen battery, lead cloth battery and so on. However, the technology of lithium ion battery, nickel hydrogen battery and lead cloth battery are
At present, most electric bicycles use DC motor, and there are many kinds of DC motor controller. The core of the controller is pulse width modulator (PWM). A perfect controller, in addition to pulse width modulator, should also have battery
Electric bicycles have a lot of insignificant, but very important small parts – and one of them is the electric bicycle controller. Although the fat tire electric bike is not remarkable, but your electric bicycle start, advance and retreat, stop
What is an Electric Bicycle Controller? Electric bicycle controller is used to control the starting, running, moving, moving, speed, stop and other electronic components of the core controller of electric vehicles. It’s like the brain of an electric car. It’s
For electric bicycles, in addition to batteries, motors, and chargers, it is also one of the important core components of the electric bicycle. The charger is mainly composed of rectifier filter, high voltage switch, fat tire electric bike, constant voltage
In this case, it should be checked whether the voltage components are in bad or damaged contact. If everything is normal, then the charger should be replaced to exclude the fault. It has a lot of heat, and it’s accompanied
First of all, in order to extend the service life of your electric vehicle, it is recommended that you have the best help when the Chinese electric bike starts, and then use electric riding; Secondly, in the course of riding,
In the past, there has been no way to prevent the sulfation of the battery, nor any way to prevent sulphuric acid from covering the lead plate. But today, the emergence of automatic sweep resonance and synchronous interference suppression pulse
The system is specially used to eliminate the problems and faults caused by the salinization of sulfide crystals on the electrode plate of lead-acid batteries. It can continuously remove the crystalline sulfides on the electrode plate of the Chinese electric
Lithium battery is a kind of battery which is composed of lithium metal or lithium alloy as negative electrode material and uses non-aqueous electrolyte solution. The earliest lithium batteries of Chinese electric bike came from the great inventor Edison, using
Temperature affect The life of lead acid battery of China electric bike increases with the increase of temperature. At 10-35 ¡æ, for each increase of 1 ¡æ, about 5-6 cycles are added. Between 35-45 ¡æ, each increase of 1 ¡æ
The failure of lead-acid battery of China electric bike is the result of many factors, which is determined by the internal factors of the plate. Such as composition of active substances, crystal form, porosity, plate size, grid material and structure,
Luxury electric cars now run at speeds as high as 35 km / h. The phenomenal development of luxury China electric bike from their birth to their subsequent development, and their market share, clearly tell us how much the market
China electric bike batteries are favored by electric bike manufacturers and users due to their unique advantages of low price, less maintenance, easy replacement and so on. However, in the process of its use there are some problems, resulting in
Whether brushless motor or brushless motor, it is normal to produce some mechanical noise (brushless) or electric magnetic resonance (EMR) during operation. However, if the brushless motor produces abnormal vibration and sound during operation, the power lock should be shut
Contacts
English 
Spanish 
French 
Portuguese 
German 
Italian 
Dutch 
Swedish